TDP Lamp CQ-29B Floor Model

Most Popular Model & Best Value

The CQ-27 Single Head TDP Floor Lamp features a round plate coated with a proprietary mineral formation consisting of 33 elements essential to the human body. When activated by an built-in electric heating element, this mineral plate emits a special band of electromagnetic waves ranging from 2 to 25(microns) in wavelength and 28 to 34 mw/sq.cm in intensity that coincide with the wavelength and intensity of the electromagnetic waves released by a human body and consequently absorbed by the body.

 
 
 
TDP Lamp CQ29 Feature:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
How to Use TDP Lamp CQ29?
Plug the power cord to the 110V socket
Switch "ON" before use.
Set up timer clockwise or switch the timer to position "ON"(with ON/OFF switch) counter clockwise.
After warm up for about 3-5 minutes, adjust the position of the lamp to get comfortable warmth(about 8-12 inch away or more).
Switch the timer to "OFF" position or wait for it to stop automatically if timer is used.
Switch "OFF" after use and then unplug the power cord from the socket.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
How does TDP Lamp CQ29 work?
Emits infrared energy in spectrum range from 2 microns to 50 microns by a thermally excited black emitting plate
The far infrared energy, penetrates deeper in to human body the cells in human body have highest penetrates absorption efficiency
Energy be absorbed by human body
Generates deep penetrating heat to render a very effective recuperative and therapeutic effect
Helps to move toxins from cells
Improvement in Lymphatic system
       
USD $139.00
   
TDP Lamp CQ29 Technical Specification:
 Spectrum Range  2 ~ 25Microns
 Power Supply  220V or 110V
 Power Consumption  <= 250W
 Extension of Supporter (mm)  400 ~ 1200
 Lifting limits of arm (mm)   > 300
 Elevation (degree)   > 270
 Azimuth (degree)   > 50
 Lifetime of Curing Mineral Plate  1000 ~ 1500 hours
 Diameter of Curing Mineral Plate  122 mm
 Auto- Timer  Mechanical, 0 t0 60 min
 Stand  Cast Iron Stand Base with Swivel Caster
>> Back to TDP Lamp Index

Home| About Us | Privacy Notice
2014 All rights reserved ChiIsland.Com.